E. Emerson Tool T-50 All in One Clamp 50-Inch Double Grip Bench Clamp with T-track

[Shop Now !!!]

Twin Clamps are designed specifically for assembly projects. The twin has two clamps built into one aluminum straight edge. One clamp faces down to hold your work table the other clamp faces up to hold your project. The Twin especially when used in pairs simplifies gluing up drawer assembly and work holding for planing or sanding. The Twin has a straight edge like our other straight clamps and will accept the Saw & Router Plate Accessories. Wide jaws can ease assembly problems. Remember the clamp lever has three power levels so you can pull together any wood stock.

• Twin Clamps are designed specifically for assembly projects but can also work as a basic straight edge clamp


• One clamp faces down to hold your work table the other clamp faces up to hold your project


• Pairs of Twin Clamps simplify assemblies and hold work pieces for planing or sanding


• Raised T-track accepts A Twin and Ultra series Saw Plate Router Plate and Stop Block but will not work with Contractor series accessories


• Nylon jaws hold work piece securely and are predrilled for accessory Wide Jaws and Tall Jaws

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Kreg PFC Face Clamps 3-1/4-Inch Premium Face Clamp

[Shop Now !!!]

The ideal size face clamp for pocket hole joinery ensures perfectly flush joint lines. Without a clamp like this the joint can sometimes misalign if the screw follows the grain of the wood.

To use place the large pad of the clamp directly over the center of the joint line on the face side of the workpiece (opposite the pocket holes) clamp with moderate pressure and drive a screw.

• Keeps the screw from following wood grain


• Place clamp pad directly over center of joint line of work piece's face side


• Four sizes are available


• Ensures a perfectly flush joint every time


• SFC - 2 reach PFC - 3-1/4 reach LFC - 6 reach and FC18 -10 reach

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

All in One Clamp T-36 36-Inch Double Grip Bench Clamp w/T-track

[Shop Now !!!]

• Twin Clamps are designed specifically for assembly projects but can also be used as a basic straight edge clamp


• One clamp faces down to hold your work table the other clamp faces up to hold your project


• Pairs of Twin Clamps simplify assemblies and hold work pieces for planing or sanding


• Raised T-track accepts A Twin and Ultra series Saw Plate Router Plate and Stop Block but will not work with Contractor series accessories


• Nylon jaws hold work piece securely and are predrilled for accessory Wide Jaws and Tall Jaws

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

All-In-One XTJ Tall Jaws Fixture for All-In-One Clamp (2 pack)

[Shop Now !!!]

• Fits all E. Emerson Tool Co. Straight Edge Clamping Tool Guides


• Aluminum jaws increase clamping surface to 3 3/4 inch wide by 1 1/4 inch high for assembly and glue up applications


• Includes 4 screws for installation


• Set of two aluminum jaws for one clamp


• Additional holes in jaws allow for attachment of customer supplied forms

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

All in One Clamp A-36 36-Inch Grip Clamp Guide with T-Track

[Shop Now !!!]

All in one clamp 36-inch grip clamp guide with T-track is the best straight edge made T-track accepts all the accessories router plates saw plates stop blocks dowel jigs pocket hole jigs All in one clamps are all the same height the thickness matches 3/4 plywood Scale ruler available in metric or inch Jaws holes accept tall jaws wide jaws and story sticks accessories

• No more C-clamping with a self-clamping straight edge to guide your power tools for truly straight cuts


• Raised T-track accepts A Twin and Ultra series Saw Plate Router Plate and Stop Block but will not work with Contractor series accessories


• Nylon jaws hold work piece securely and are predrilled for accessory Wide Jaws and Tall Jaws


• Handy clamp for glue-ups assembly projects and even doubles as a fence for your drill press or band saw

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Bessey EKT55 One-Handed Edge Clamp

[Shop Now !!!]

Features a compound screw mechanism which allows simultaneous engagement of the top and bottom pressure pads while pressure is applied to the front edge of the countertop. Can clamp surfaces up to 2-1/8" thick. Pressure pads use soft plastic caps for gentle no-slip clamping. Strong aluminum frame.

• Clamp panels from 3/8 inch to 2 inch


• Prevents materials from slipping


• No harm to clamped surfaces


• Provides secure hold while realignment


• Max: 450-500 lbs. of pressure

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

PRO-GRIP 90 DEGREE HEAD BY PEACHTREE WOODWORKING PW569

[Shop Now !!!]

Turn any of your PROGRIP straight edge clamps into a oversized t-square. The large 90 degree head slides directly over the top of the PRO-GRIP clamp head and fastens securely onto the clamp with 2 screws (included)

• Turn any size PRO-GRIP straight edge clamp into a oversized T-square


• Slides over the top of the PRO-GRIP clamp head


• Fastens securely on the clamp with 2 screws (included)


• 90 Degree head allows you to line up square with the edge of your stock for fast 90 degree cuts


• Clamp and wood NOT INCLUDED

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Bora 542001 Clamp Edge Wide Track Saw Guide

[Shop Now !!!]

The Bora Wide-Track Saw Guide minimizes blade binding by keeping your saw accurately aligned with the cut.

• Use with all Bora Wide Track Clamp Edges


• Make cuts accurately


• Save time and material waste


• Eliminate blade binding


• Made in Sweden. Lifetime warranty

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

PRO-GRIP UNIVERSAL FENCE BY PEACHTREE WOODWORKING PW606

[Shop Now !!!]

Add one or two fences to any of your PRO-GRIP clamps and you have a short or long fence where you need it. Great on a bandsaw router table or drill press. T-slots running the length on the back and front allows for fastening feather boards false fence boards and stop blocks.

• Fence is 3 1/2" H x 18" L


• Add one or two fences to any PRO-GRIP clamps for a short or long fence


• Use on bandsaw router table or drill press


• T-slots run the length on the back and front of the fence


• Fasten feather boards false fence boards & stop blocks -Drill PRESS & CLAMP SOLD SEPARATELY

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

36" Pro-Grip Solid Back To Back Edge Clamp By Peachtree Woodworking PW585

[Shop Now !!!]

The Back to Back Solid Clamp is two clamps in one extrusion which do not separate. Secure two Pro-grip back to back solid clamps to your work bench with the lower jaws and then clamp your stock between the top jaws. This set-up turns your workbench into a large vise allowing you to perform glue ups sanding and even routing. With the low profile jaws on these clamps your work surface is never obstructed. The back to back solid clamps can also be as a straight edge guide for sawing routing and will accept any of the PRO-GRIPTM Power Tool Guide Plates.

• 36" - 2 clamps in 1 extrusion which do not separate


• Low profile jaws


• Can be used as a straight edge guide for sawing and routing


• Pro -Grip Solid Back To Back Clamps are best used in pairs


• Clamps sold 1 each clamp - 2nd clamp wood and sander in photo Not Included

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

All in One Clamp SB Stop Block w/ Micro Adjustment

• Easy stop set up


• Micro-adjustment capability with a lock nut to handle tricky jobs


• Table extension capability for big jobs


• Stop Block fits over raised T-track on the A Twin and Ultra series clamps but will not work with Contractor series


• Wing nut tightens to lock Stop Block into position

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Bora 541050 Clamp Edge Wide Track 50-Inch

BORA Clamp Edge Wide Track tool guides are more than just a wider version of the original Clamp Edge tool guides. Improved clamp design in a wider more rigid guide extrusion that includes T-tracks for added versatility. Sizes denote maximum clamping capacity.

• Extra wide 3-3/8-Inch aircraft-grade extruded aluminum body


• Integrated dual "T" tracks allow the head of a standard 1/4-Inch-20 bolt to slide into the "T" track to attach shop accessories


• Integrated clamping mechanism with a large soft grip clamp surface


• Large oversized clamping handle hangs easily when not in use


• Lifetime warranty

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

All in One Clamp A-12 12-Inch Grip Clamp Guide with T-Track

The E. Emerson Tool Company A-12 All-in-One 12-Inch Grip Clamp Guide uses edge to edge clamps that are quickly adjustable and has low profile unobtrusive jaws to secure wood while staying out of your way. The tall wide jaws provide flexibility and the jaw holes accept steel jaw teeth for use on steel tables and the scale ruler can be used for metric or inch measurements. The built-in T-track accommodates all manner of accessories such as router plates stop blocks and jigs. The clamp thickness matches 3/4-inch plywood sheets and a micro-adjustable stop provides superior precision in a tool given 5 stars by Popular Woodworking magazine.

• No more C-clamping with a self-clamping straight edge to guide your power tools for truly straight cuts


• Raised T-track accepts A Twin and Ultra series Saw Plate Router Plate and Stop Block but will not work with Contractor series accessories


• Nylon jaws hold work piece securely and are predrilled for accessory Wide Jaws and Tall Jaws


• Handy clamp for glue-ups assembly projects and even doubles as a fence for your drill press or band saw

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

All in One Clamp A-24 24-Inch Grip Clamp Guide w/T-track

The first zero-deflection straight edge clamping guide! Provides you with straighter and more accurate cuts dadoes and routing without additional clamps.


New and improved design features:
30% wider integral clamping jaws for tighter clamping and less
marring of wood.
50% wider locking lever for quick easy clamping of guide.
Full-color measuring scale with large numbers (in 1/4" increments).


The perfect woodworking combination clamp and edge guide!
Integral clamping jaws and locking lever provide a quick easy
way of clamping the guide.


Features instant edge-to-edge clamping low profile with no
obstruction extra long handle and 1-3/4" wide extrusion.
Built-in T-track on top of the guide allows you to use any of our
versatile accessories or shop-made jigs.


Please Note: To engage the jaw the first few times the "I"-shaped blue finger-grip MUST be pushed snug against the sliding jaw for the jaw to lock. Squeeze together until it clicks. Then push the finger-grip AWAY from the jaw to unlock sliding jaw.

• No more C-clamping with a self-clamping straight edge to guide your power tools for truly straight cuts


• Raised T-track accepts A Twin and Ultra series Saw Plate Router Plate and Stop Block but will not work with Contractor series accessories


• Nylon jaws hold work piece securely and are predrilled for accessory Wide Jaws and Tall Jaws


• Handy clamp for glue-ups assembly projects and even doubles as a fence for your drill press or band saw

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

XRP 8-Inch by 9-Inch Router Plate Black

• Router Plate tracks along the All-In-One Straight Edge Clamping Tool Guide eliminating router kick for a smooth cut


• Router Plate rail fits over raised T-track on the A Twin and Ultra series clamps


• Predrilled with a variety of hole patterns to accommodate most routers


• Fits routers with up to a 6” diameter base

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

All in One Clamp U-54 54-Inch Ultra Wide Grip Clamp with Double T-Track

• No more C-clamping with a self-clamping straight edge to guide your power tools for truly straight cuts


• Aluminum extrusion is extra wide for rigidity over the 54 inch length


• Raised T-tracks accept A Twin and Ultra series Saw Plate Router Plate and Stop Block but will not work with Contractor series accessories


• Nylon jaws hold work piece securely and are predrilled for accessory Wide Jaws and Tall Jaws


• Make cross cuts on 4 foot by 8 foot stock

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

All in One Clamp U-99 99-Inch Ultra Wide Grip Clamp with Double T-Track

• No more C-clamping with a self-clamping straight edge to guide your power tools for truly straight cuts


• Aluminum extrusion is extra wide for rigidity over the 99 inch length


• Raised T-tracks accept A Twin and Ultra series Saw Plate Router Plate and Stop Block but will not work with Contractor series accessories


• Nylon jaws hold work piece securely and are predrilled for accessory Wide Jaws and Tall Jaws


• Make lengthwise cuts on 4 foot by 8 foot stock

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

All-In-One Clamp XWJ Wide Jaws Fixture for All-In-One Clamp (2-Pack)

• Fits all E. Emerson Tool Co. Straight Edge Clamping Tool Guides


• Aluminum jaws increase width of clamping surface to 3 3/4 inches


• Includes 4 screws for installation


• Additional holes in jaw allow for attachment of customer supplied “story sticks”


• Set of two aluminum jaws for one clamp

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

All in One Clamp XSP 9-Inch X 12-Inch Saw Plate

The E. Emerson Tool Company SP All-in-One 9-by-12-Inch Saw Plate lets you keep your cuts straight and true doing away with the splintering and mistakes that can happen with free hand cuts. Just lock it into a T-track for a secure fit and rest assured that the HDPE construction has produced a strong durable plate.Saw Plate tracks along the All-In-One Straight Edge Clamping Tool Guide for a smooth controlled cut with your circular sawSaw Plate rail fits over raised T-track on the A Twin and Ultra series clampsFits most circular saws with up to a 7 ���� bladeOpening in plate allows blade guard on saw to function for safe operationZero clearance minimizes splintering

• Saw Plate tracks along the All-In-One Straight Edge Clamping Tool Guide for a smooth controlled cut with your circular saw


• Saw Plate rail fits over raised T-track on the A Twin and Ultra series clamps


• Fits most circular saws with up to a 7 ¼” blade


• Opening in plate allows blade guard on saw to function for safe operation


• Zero clearance minimizes splintering

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

All in One Clamp A-50 50-Inch Grip Clamp Guide w/T-track

All in one clamp 50-inch grip clamp guide with T-track is the best straight edge made T-track accepts all the accessories router plates saw plates stop blocks dowel jigs pocket hole jigs All in one clamps are all the same height the thickness matches 3/4 plywood Scale ruler available in metric or inch Jaws holes accept tall jaws wide jaws and story sticks accessories

• No more C-clamping with a self-clamping straight edge to guide your power tools for truly straight cuts


• Raised T-track accepts A Twin and Ultra series Saw Plate Router Plate and Stop Block but will not work with Contractor series accessories


• Nylon jaws hold work piece securely and are predrilled for accessory Wide Jaws and Tall Jaws


• Handy clamp for glue-ups assembly projects and even doubles as a fence for your drill press or band saw


• Make cross cuts on 4 foot by 8 foot stock

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Pony 8510BP Cabinet Claw (2-Pack)

Fast easy cabinet installation with dual purpose clamping functions; two-way clamping for tightening and aligning face frames pre-drilling placement guide for accurate pilot hole drilling and screw fastening. Includes pilot drill bit and non-marring pad protectors.

• 2-pack of cabinet claw clamps; no removal until installation is complete; 1/8-inch standard drill bit


• Strong-holding clamps work with stiles from 1-1/2 to 2-inches wide and up to 1-1/2-inches thick


• Lightweight rugged aluminum claws and plates; protective felt pads zinc-plated screws plastic handles


• Sold as pair


• 4-inch opening capacity; 1-year warranty

More detail ...

All in One Clamp U-54 54-Inch Ultra Wide Grip Clamp with Double T-Track

• No more C-clamping with a self-clamping straight edge to guide your power tools for truly straight cuts
• Aluminum extrusion is extra wide for rigidity over the 54 inch length
• Raised T-tracks accept A, Twin, and Ultra series Saw Plate, Router Plate and Stop Block but will not work with Contractor series accessories
• Nylon jaws hold work piece securely and are predrilled for accessory Wide Jaws and Tall Jaws
• Make cross cuts on 4 foot by 8 foot stock