E. Emerson Tool T-50 All in One Clamp 50-Inch Double Grip Bench Clamp with T-track

[Shop Now !!!]

Twin Clamps are designed specifically for assembly projects. The twin has two clamps built into one aluminum straight edge. One clamp faces down to hold your work table the other clamp faces up to hold your project. The Twin especially when used in pairs simplifies gluing up drawer assembly and work holding for planing or sanding. The Twin has a straight edge like our other straight clamps and will accept the Saw & Router Plate Accessories. Wide jaws can ease assembly problems. Remember the clamp lever has three power levels so you can pull together any wood stock.

• Twin Clamps are designed specifically for assembly projects but can also work as a basic straight edge clamp


• One clamp faces down to hold your work table the other clamp faces up to hold your project


• Pairs of Twin Clamps simplify assemblies and hold work pieces for planing or sanding


• Raised T-track accepts A Twin and Ultra series Saw Plate Router Plate and Stop Block but will not work with Contractor series accessories


• Nylon jaws hold work piece securely and are predrilled for accessory Wide Jaws and Tall Jaws

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Kreg PFC Face Clamps 3-1/4-Inch Premium Face Clamp

[Shop Now !!!]

The ideal size face clamp for pocket hole joinery ensures perfectly flush joint lines. Without a clamp like this the joint can sometimes misalign if the screw follows the grain of the wood.

To use place the large pad of the clamp directly over the center of the joint line on the face side of the workpiece (opposite the pocket holes) clamp with moderate pressure and drive a screw.

• Keeps the screw from following wood grain


• Place clamp pad directly over center of joint line of work piece's face side


• Four sizes are available


• Ensures a perfectly flush joint every time


• SFC - 2 reach PFC - 3-1/4 reach LFC - 6 reach and FC18 -10 reach

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

All in One Clamp T-36 36-Inch Double Grip Bench Clamp w/T-track

[Shop Now !!!]

• Twin Clamps are designed specifically for assembly projects but can also be used as a basic straight edge clamp


• One clamp faces down to hold your work table the other clamp faces up to hold your project


• Pairs of Twin Clamps simplify assemblies and hold work pieces for planing or sanding


• Raised T-track accepts A Twin and Ultra series Saw Plate Router Plate and Stop Block but will not work with Contractor series accessories


• Nylon jaws hold work piece securely and are predrilled for accessory Wide Jaws and Tall Jaws

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

All-In-One XTJ Tall Jaws Fixture for All-In-One Clamp (2 pack)

[Shop Now !!!]

• Fits all E. Emerson Tool Co. Straight Edge Clamping Tool Guides


• Aluminum jaws increase clamping surface to 3 3/4 inch wide by 1 1/4 inch high for assembly and glue up applications


• Includes 4 screws for installation


• Set of two aluminum jaws for one clamp


• Additional holes in jaws allow for attachment of customer supplied forms

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]